Roof Sectioned Sheet Metal TR 60/210
B = 820mm
TR 60/210 is trapezoidal section intended exclusively for large buildings where large load bearing capacity is required. Section TR60/210 tolerates small roof inclinations up to 4%. It is produced with the most modern automatic machines.
|Sheet metal thickness:||0,5 mm – 1,0 mm|
|Sheet metal width:||1250 mm|
|Profile width:||820(±10) mm|
|Length:||up to 15 000 mm|
The materials used in its production are steel, galvanized, plasticized sheet metals and plasticized aluminum sheet metals, if necessary.
Available in all colors from the RAL color chart